For EU customers registered for VAT (Value Added Tax) an option during checkout will zero the VAT by entering a registered VAT number.

Click here to see how!

ICS 695XL-F4 Concrete Chainsaw

SKU 07881
In stock
Product Details

The 695XL F4 comes with all the benefits and features as the 695GC, with the addition of FORCE4 chain and bar. This allows the saw to deep cut concrete, precast concrete, reinforced concrete, natural stone, masonry and similar masonry materials.

Available as:

Machine only

Package Option - 12-inch (30 cm) FORCE4 Guidebar and ProFORCE-25 Chain

Package Option - 16-inch (40cm) FORCE4 Guidebar and ProFORCE-29 Chain

Features and Benefits

  • Use on concrete, precast concrete, reinforced concrete, natural stone and masonry
  • New piston and cylinder lowers engine temperature
  • Longer life muffler with reinforced internal baffle
  • Easy-to-start with higher energy ignition system
  • New easy-to-tune carburetor

Technical Information

Engine Type: 2-Stroke, Air Cooled

Displacement: 94cc (5.7 cu-in)

Horsepower: 4.8kW (6.4 hp) @ 9000 rpm

Torque: 5.7 Nm (50.4 in-lbs) @ 7200 rpm

Engine Speed: 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)

Chain Speed at Maximum Power: 28 m/s (5500 ft /min)

Weight: 9.5 kg (21 lbs) powerhead only

Dimensions: 46cm (18") L x 36cm (14") H x 30cm (12") W

Starter: Recoil, dust and water resistant

Ignition: Special water resistant electronic ignition

Fuel Ratio: 2% (50:1) petrol-to-oil

Fuel Capacity: 1 liter (0.26 gallon)

Water Supply Requirement: Minimum: 1.5 bar (20 psi)

Water Flow Requirement: Minimum: 4 lpm (1 gpm)

Guaranteed Sound Power Level, Lwa (1): 115 dB(A); (Kwa=1.0 dB(A))

Equivalent Sound Pressure at the Operator's Ear Lwa: 104.6 dB(A) (K=1.0 dB(A))

Vibration, ahv eq Concrete Cutting (2): 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle

Vibration, ahv eq Pipe Cutting (2): 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle

Save this product for later