Skip to Content

Diamond Core Bits

Diamond Core Bits

Picking the Right Diamond Core Bits

Many construction jobs require cutting through hard materials, providing access for wiring, pipes or just to open interior spaces for further work. Using diamond core bits with a heavy-duty drill is an effective and efficient way to complete these tasks. We have drill core bits are available in a wide range of lengths and sizes, ensuring that the depth and width of your cutting is exact.
The wide range of different diamond core bits available can seem daunting. We have compiled a shortlist of the key characteristics to look out for when you need a diamond core bit.


Diamond Core Bits

Wet or Dry

It is important to know ahead of time if you will be cutting wet or dry. While most diamond core bits we sell support both methods, it is always worth taking the time to check.

Diamond Core Bits


Will you be drilling through a single material, or does your job require drilling through a few different types? If you are going to use the diamond core bits exclusively for drilling through concrete, for example, you may want to invest in a specialist bit. If, however, you will also need to drill through brick, stone or other masonry then you should consider a diamond core bit with a wider range.

Diamond Core Bits

Length and Diameter

Not all diamond core bits are available in every length and diameter. Make sure that any holes you are drilling are wide enough to provide the necessary access. Also consider the space you will have to drill in. If there is no room for a right-angle drill, you may still be able to go through at an angle. We would suggest using a drill stand if that is the case, ensuring your diamond core bit drill through evenly.

Diamond Core Bits


Diamond core bits are available in gold, silver and bronze performance grades. Consider how long you would like to keep the drill bit for. A more expensive diamond core bit that lasts will work out cheaper than repeatedly replacing a lower performance grade.

We hope that helps you pick out the diamond core bit which is right for you. For more information on the Husqvarna Diamond Core Bits range, you can visit this link: Husqvarna Diamond Core Bits

0 Continue Reading →

The Husqvarna DS250 Drill Stand For Mid Sized Core Drilling.

The Husqvarna DS250 is a mid sized drill stand compatible which is compatible with the Husqvarna core drill range. This lightweight stand made of aluminium has a combined base plate to enable both anchoring and vacuum to the surface being work upon. An ideal choice for core drilling applications up to 250mm in diameter. It is suitable for stitch and angle drilling for ventilation and plumbing jobs.

The Husqvarna DS250 Drill Stand

Husqvarna DS250

Features and benefits of the DS250 drill stand.

  • The carriage has guide rollers which helps drill straight holes.
  • Carriage with single and double gearing for efficient drilling.
  • The unit can be set for drilling at different angles.
  • Lightweight base plate made of aluminium with integrated vacuum base, which means fast setup with no damages to the surroundings.


Technical Specifications

Cutting equipment

Max drill bit diameter

250 mm / 9.84 inch

Travel length

685 mm / 26.97 inch

Other specs

Suitable for Husqvarna core drills:

DM220, DM230, DM280


0 Continue Reading →

Husqvarna DM 230 Core Drill For Diamond Core Drilling.

The Husqvarna DM 230 is a hand held electric core drill with an attractive and sleak design. It has functional ergonomics which are designed specifically for diamond core drilling. The motor is designed with a pistol grip giving you greater control when in use. There is hand held core drilling available up to 80mm, or when drilling with stand up to 150mm. The DM 230 is suitable for light applications such as ventilation, plumbing pipes and electrical sockets and cables. A DM 230 core drill is an excellent choice for professionals as well as semi professionals within the diamond core drilling industry. Purchase a  DM 230 today from Findasaw.com or for more information please call (01691) 655755.

Husqvarna DM 230 For Diamond Core Drilling.

Husqvarna DM 230

Features and benefits of the Husqvarna DM 230

  • The Husqvarna DM 230 uses a pulsation system to warn you if you are approaching an overload. If the load is not reduced the motor will shut off, to prevent it overheating. The Elgard system increases the productivity of the machine and extends the life of the product.
  • The DM 230 has a water cooled three speed gearbox for optimal drilling performance. This water cooled gearbox also means longer periods until a service is required.
  • To help making a starter hole, the speed is reduced by half using the smart start button on the machine.
  • It is a durable machine and is shock roof. The DM 230 is designed to protect the electronics within the machine. The DM 230 is easy to carry and install thanks to its low weight and its ergonomic design.


Technical Specifications


Power1850 W
Output RPM at full load580 / 1400 / 2900 rpm
Spindle speed full load580/1400/2900 rpm
Rated output, W1850/0 W

Drill bit

Max drill bit diameter, handheld80 mm / 3 inch
Max drill bit diameter, stand150 mm / 6 inch


Weight7 kg / 15.4 lbs



0 Continue Reading →

Husqvarna Core Drill – in Stock

Range of Husqvarna Construction Products, Husqvarna Core Drill, Diamond Core Bits, Adaptors, Rigs, Vacuum Pump and more from Findasaw.com.

Husqvarna Construction Products UK Stockist. Based in Oswestry, Shropshire we are on the border to Welshpool, Wrexham, Shrewsbury, Ellesmere, Chester, Newtown.

Free local delivery and UK courier available. Visit our showroom for trade prices.

Husqvarna Core Drill


We have a range of Diamond Core Drills and Rigs to suit a range of tasks within the construction industry. Sizes start from 10mm to 900mm diameter. Both handheld drilling or with drill rig for concrete drilling. D810, D1410, D1410 are just some of the core bits we supply. Also the Husqvarna AD10 will provide automatic drilling.

Models available include:

Husqvarna DM220, DM230,DM280, DM340

Also Drill Stands available include:

DS150, DS250, DS450 and Drill with Stand DMS240.



Husqvarna Core Drill for Concrete Drilling

Husqvarna Core Drill for Concrete Drilling

We have been growing our range of construction products with Husqvarna being the main brand we supply due to the quality and reliability. Service, Repair and Spare Parts is what we also offer on all of our products. For help and advice feel free to give us a call or visit our premises. Use our charts to choose the right diamond core bit for you. Our charts will show you the type of material against the performance of the core bit for that material. Premium diamond segments with a range of sizes. 110v is the standard voltage the machines are manufactured in for industrial site use. A continuous 3kva transformer is available to purchase.

The core drill stands can be fastened down by anchoring to the floor using bolts or the vacuum pump will do this using suction. The dust suppression can also be managed using a vacuum to collect the dust. Accessories and adapters are also available.

Husqvarna Drill Range


0 Continue Reading →